Is it just me, or does everyone have that one room in your house that’s just…embarrassing?
You know – the room where you always keep the door closed and you shove everything that doesn’t have a home into. The room that feels completely hopeless and that you think will never be a place you actually want to spend any time.
Ugh. That room.
Well, I decided to do something about ours.
Prior to now, this room has been basically untouched since the day we moved in – we use it to hold our two (giant) dog kennels, and I work out in it, but other than that it’s pretty unused. And pretty ugly.
We decided it was high time to do something about it…we started off by emptying out the room…
Quite frankly, it was already a vast improvement.
We had decided to turn it into a reading room – I’m a big reader and would love to have a place to relax and hang out, and since we don’t have any kids yet this room could be used for just about anything. We wanted the room to have the feel of what you think of when you picture a traditional reading room, but an updated, more modern version of that.
We decided to add some architecture with crown molding and trim around the room – and the first step was marking where we wanted it. Our decision was kind of arbitrary – Google told us that the standard height for chair molding is anywhere between 30″ and 36″, so we played around with it by holding up a piece at various heights. We decided to go against all of the rules and hang ours at 40″ – no real rhyme or reason, it just looked best to us…and we’re rebels like that.
Once it was all marked, I got to painting. We went with a pretty hunter green for the top half (Juniper by Valspar, if you’re interested) and a bright white on the bottom. At this point, our dogs’ kennels were still in the room (it’s a pain to take them apart, so we were postponing it), so I used ’em as a nice stepladder to help me reach the ceilings. Hey, I’m nothing if not resourceful!
Once the room was all painted, it was time to bring in the bookcases – we used IKEA Billy bookcases, and we wanted them to look built-in. But, before we installed them we wanted to add a bit of fun to the back panel (the room so far was very traditional, and it needed a fun modern punch), so we decided to go with gold stripes. I did them 3″ thick, and I just taped off every other stripe with my trusty Frog Tape and spray painted the backs.
After everything was all dried, we brought it into the room. We laid down a spare 1×12 board to give the bookcases a little more height – without it, the crown molding wouldn’t have fit, so we needed to bump them up just a bit. It’s not even noticeable in the finished product, it just blends right in and gives it an extra inch.
One of the tricky parts here was that we had an outlet and a light switch on the wall where the bookcases were going. We wanted the whole thing to look as built-in as possible, so we needed to cut some holes in the back of the bookcase. To figure out where to cut, we got creative and put some lip gloss on the switch (and the outlet) at the four corners.
Then we pressed the bookcase up to the lipgloss so it would transfer over exactly where it needed to be…
And from there it was super easy to cut a small hole and add the cover!
It’s a small touch, but it makes a huge difference towards making the whole thing feel more custom.
At this point, the bookcases were in and it was time for the finishing touches – like the trim! I won’t give a full rundown on how we did this (there are so many other people who could explain it so much better than me), but it was a pretty straightforward process – except for the crown molding, which hurts my brain and we won’t be doing again for as long as we can avoid it!
In addition to the chair molding and the crown, we added some picture molding around the bottom half of the wall – we wanted to amp up the traditional feeling of the room a little more and add some fun detail. It’s one of those touches that kind of layers into the room and isn’t that noticeable in the finished product, but it wouldn’t be quite the same without it!
We also added a cute, modern wingback chair from IKEA that the dogs were instantly drawn to, especially Ranger. I’m surprised we got them to stay out of it long enough to take the final photos!
Once the trim was complete, it was time for the fun part to begin – bringing in the accessories!
Our other big DIY project for this room was our tree stump table. You can see the full tutorial for that over here – I promise it’s way easier than you think it is!
And that’s how we turned an empty, boring room into a reading room that I plan on using on a daily basis. I’m so in love with how it looks now, and I can’t believe it took us this long to take care of it!
What would you do with an extra empty room in your house?
(Sharing at Remodelaholic)